View STH130N10F3-2_6985828.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. november 2012 doc id 018492 rev 3 1/23 23 stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 n-channel 100 v, 7.8 m typ., 120 a stripfet?iii power mosfet in to-220fp, i2pakfp, h2pak-2 and to-220 packages datasheet ? production data features ultra low on-resistance 100% avalanche tested applications high current switching applications description these devices are n-channel enhancement mode power mosfets produced using stmicroelectronics? stripfet? iii technology, which is specifically designed to minimize on- resistance and gate charge to provide superior switching performance. figure 1. internal schematic diagram order codes v dss r ds(on) max. i d stf130n10f3 100 v 9.6 m 46 a stfi130n10f3 STH130N10F3-2 9.3 m 120 a stp130n10f3 9.6 m 1 2 3 ta b 1 2 3 to-220fp to-220 1 2 tab 3 h2pak-2 1 2 3 i2pakfp !-v $4!" ' 3 $4!" ' 3 4/ 4/ &0and) 0!+&0 (0!+ table 1. device summary order codes marking package packaging stf130n10f3 130n10f3 to-220fp tube stfi130n10f3 i2pakfp tube STH130N10F3-2 h2pak-2 tape and reel stp130n10f3 to-220 tube www.st.com
contents stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 2/23 doc id 018492 rev 3 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 electrical ratings doc id 018492 rev 3 3/23 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit to-220fp i2pakfp h2pak-2 to-220 v ds drain-source voltage 100 v v gs gate-source voltage 20 v i d (1) 1. current limited by package. drain current (continuous) at t c = 25c 46 120 a i d (1) drain current (continuous) at t c =100c 29 78 a i dm (2) 2. pulse width limited by safe operating area. drain current (pulsed) 184 450 a p tot total dissipation at t c = 25c 35 250 w dv/dt peak diode recovery voltage slope 22 v/ns v iso insulation withstand voltage (rms) from all three leads to external heat sink (t = 1 s; t c = 25 c) 2500 v e as (3) 3. starting tj = 25 c, i d = 50 a, v dd = 50 v for to-220 and h 2 pak-2; starting tj = 25 c, i d = 29 a, v dd = 60 v for i 2 pakfp and to-220fp. single pulse avalanche energy 125 mj t j t stg operating junction temperature storage temperature - 55 to 175 c table 3. thermal data symbol parameter value unit to-220fp i2pakfp h2pak-2 to-220 rthj-case thermal resistance junction-case 4.3 0.6 0.6 c/w rthj-a thermal resistance junction-ambient 62.5 62.5 c/w rthj-pcb (1) 1. when mounted on fr-4 board, on 1inch2, 2oz cu. thermal resistance junction-pcb 35 c/w
electrical characteristics stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 4/23 doc id 018492 rev 3 2 electrical characteristics (t case = 25 c unless otherwise specified) table 4. on/off states symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage v gs = 0, i d = 250 a 100 - v i dss zero gate voltage drain current v gs = 0, v ds = 100 v t c =25c t c =125c -10 100 a a i gss gate body leakage current v ds = 0, v gs = 20 v - 200 na v gs(th) gate threshold voltage v ds = v gs , i d = 250 a 2 - 4 v r ds(on) static drain-source on- resistance v gs = 10 v, i d = 23a to-220fp and i2pakfp 89.6 m v gs = 10 v, i d = 60 a h2pak to-220 7.8 8 9.3 9.6 table 5. dynamic symbol parameter test conditions min. typ. max. unit c iss c oss c rss input capacitance output capacitance reverse transfer capacitance v gs = 0, v ds = 25 v, f = 1 mhz - 3305 373 23 - pf pf pf q g q gs q gd total gate charge gate-source charge gate-drain charge v dd = 50 v, i d = 120 a, v gs = 10 v (see figure 20 ) - 57 22 17 - nc nc nc table 6. switching times symbol parameter test conditions min. typ. max. unit t d(on) t r t d(off) t f tu r n - o n d e l ay t i m e rise time turn-off delay time fall time v dd = 50 v, i d = 60 a r g =4.7 v gs = 10 v (see figure 19 , figure 24 ) - 17 38 52 7.2 - ns ns ns ns
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 electrical characteristics doc id 018492 rev 3 5/23 table 7. source drain diode symbol parameter test conditions min. typ. max. unit i sd i sdm (1) 1. pulse width limited by safe operating area source-drain current source-drain current (pulsed) for to-220fp and i2pakfp - 46 184 a a i sd i sdm (2) 2. pulse width limited by safe operating area source-drain current source-drain current (pulsed) for to-220, h2pak-2 - 120 450 a a v sd (3) 3. pulsed: pulse duration = 300 s, duty cycle 1.5% forward on voltage i sd =120 a, v gs =0; for to-220, h2pak-2 -1.5v i sd =46 a, v gs =0; for to-220fp and i2pakfp t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd =120 a, di/dt = 100 a/s, v dd =80 v, tj=150 c (see figure 21 ) - 68 182 5.4 ns nc a
electrical characteristics stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 6/23 doc id 018492 rev 3 2.1 electrical characteristics (curves) figure 2. safe operating area for to-220fp and i2pakfp figure 3. thermal impedance for to-220fp and i2pakfp figure 4. safe operating area for h2pak-2 and to-220 figure 5. thermal impedance for h2pak-2 and to-220 figure 6. output characteristics figure 7. transfer characteristics i d 100 10 1 0.1 0.1 1 v d s (v) 10 (a) oper a tion in thi s a re a i s limited b y m a x r d s (on) 100 s 1m s 10m s tj=175c tc=25c s ingle p u l s e am11 3 05v1 i d 100 10 1 0.1 0.1 1 v d s (v) 10 (a) oper a tion in thi s a re a i s limited b y m a x r d s (on) 100 s 1m s 10m s tj=175c tc=25c s ingle p u l s e am11 3 04v1 10 -6 10 -5 10 -4 10 - 3 10 -2 t p ( s ) 10 - 3 10 -1 k 0.2 0.05 0.02 0.01 0.1 zth=k rthj-c =tp/ tp s ingle p u l s e =0.5 10 -2 10 -1 10 0 2 8 0toeg i d 150 100 50 0 0 2 v d s (v) 4 (a) 1 3 5 200 250 6v 7v v g s =10v 6 7 8 am11 3 06v1 i d 150 100 50 0 0 4 v g s (v) 8 (a) 2 6 200 250 v d s =6v am11 3 07v1
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 electrical characteristics doc id 018492 rev 3 7/23 figure 8. static drain-source on-resistance for to-220fp and i2pakfp figure 9. static drain-source on-resistance for h2pak-2 figure 10. static drain-source on-resistance for to-220 figure 11. normalized b vdss vs temperature figure 12. gate charge vs gate-source voltage figure 13. capacitance variations r d s (on) 8 .0 7.5 7.0 6.5 20 i d (a) (m ) 10 3 0 8 .5 9.0 9.5 v g s =10v 40 51525 3 545 am11 3 10v1 r d s (on) 8 .0 7.5 7.0 6.5 0 40 i d (a) (m ) 20 60 8 .5 9.0 9.5 10.0 v g s =10v 100 8 0 120 am11 3 09v1 r d s (on) 8 .0 7.5 7.0 6.5 0 40 i d (a) (m ) 20 60 8 .5 9.0 9.5 10.0 v g s =10v 100 8 0 120 am11 3 0 8 v1 bv d ss -75 t j (c) (norm) -25 75 25 125 0.90 0.95 1.00 1.05 1.10 175 i d =250 a am11 3 1 8 v1 v g s 6 4 2 0 0 q g (nc) (v) 20 8 10 10 v dd =50v i d =120a 3 0 12 50 40 60 70 am11 3 11v1 c 1000 100 10 0.1 10 v d s (v) (pf) 1 10000 ci ss co ss cr ss 100 f = 1 mhz am11 3 12v1
electrical characteristics stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 8/23 doc id 018492 rev 3 figure 14. normalized gate threshold voltage vs temperature figure 15. normalized on-resistance vs temperature for to-220fp and i2pakfp figure 16. normalized on resistance vs temperature for h2pak-2 and to-220 figure 17. source-drain diode forward characteristics for to-220fp and i2pakfp v g s (th) 0. 8 0.6 0.4 0.2 -75 t j (c) (norm) -25 1.0 75 25 125 175 1.2 i d =250 a am11 3 1 3 v1 r d s (on) 1.7 1. 3 0.9 0.5 -75 t j (c) (norm) -25 75 25 125 2.1 175 i d =2 3 a v g s =10v am11 3 15v1 r d s (on) 1.7 1. 3 0.9 0.5 -75 t j (c) (norm) -25 75 25 125 2.1 175 i d =60a v g s =10v am11 3 14v1 v s d 0 10 i s d (a) (v) 5 25 15 20 0.4 0.5 0.6 0.7 0. 8 0.9 1.0 t j =-55c t j =175c t j =25c 3 0 40 3 5 45 am11 3 17v1
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 electrical characteristics doc id 018492 rev 3 9/23 figure 18. source-drain diode forward characteristics for h2pak-2 and to-220 v s d 0 40 i s d (a) (v) 20 100 60 8 0 0.4 0.5 0.6 0.7 0. 8 0.9 1.0 t j =-55c t j =175c t j =25c 120 am11 3 16v1
test circuits stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 10/23 doc id 018492 rev 3 3 test circuits figure 19. switching times test circuit for resistive load figure 20. gate charge test circuit figure 21. test circuit for inductive load switching and diode recovery times figure 22. unclamped inductive load test circuit figure 23. unclamped inductive waveform figure 24. switching time waveform am0146 8 v1 v g s p w v d r g r l d.u.t. 2200 f 3 . 3 f v dd am01469v1 v dd 47k 1k 47k 2.7k 1k 12v v i =20v=v gmax 2200 f p w i g =con s t 100 100nf d.u.t. v g am01470v1 a d d.u.t. s b g 25 a a b b r g g fa s t diode d s l=100 h f 3 . 3 1000 f v dd am01471v1 v i p w v d i d d.u.t. l 2200 f 3 . 3 f v dd am01472v1 v (br)d ss v dd v dd v d i dm i d am0147 3 v1 v d s t on td on td off t off t f t r 90 % 10 % 10 % 0 0 90 % 90 % 10 % v g s
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 package mechanical data doc id 018492 rev 3 11/23 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com. ecopack is an st trademark.
package mechanical data stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 12/23 doc id 018492 rev 3 table 8. to-220fp mechanical data dim. mm min. typ. max. a4.4 4.6 b2.5 2.7 d2.5 2.75 e 0.45 0.7 f0.75 1 f1 1.15 1.70 f2 1.15 1.70 g 4.95 5.2 g1 2.4 2.7 h10 10.4 l2 16 l3 28.6 30.6 l4 9.8 10.6 l5 2.9 3.6 l6 15.9 16.4 l7 9 9.3 dia 3 3.2
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 package mechanical data doc id 018492 rev 3 13/23 figure 25. to-220fp drawing 7012510_rev_k_b
package mechanical data stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 14/23 doc id 018492 rev 3 figure 26. i 2 pakfp (to-281) drawing table 9. i 2 pakfp (to-281) mechanical data dim. mm min. typ. max. a4.40 - 4.60 b2.50 2.70 d2.50 2.75 d1 0.65 0.85 e0.45 0.70 f0.75 1.00 f1 1.20 g4.95 5.20 h 10.00 10.40 l1 21.00 23.00 l2 13.20 14.10 l3 10.55 10.85 l4 2.70 3.20 l5 0.85 1.25 l6 7.30 7.50 rev!
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 package mechanical data doc id 018492 rev 3 15/23 table 10. h2pak-2 mechanical data dim. mm min. typ. max. a4.30 - 4.80 a1 0.03 0.20 c1.17 1.37 e4.98 5.18 e0.50 0.90 f0.78 0.85 h 10.00 10.40 h1 7.40 7.80 l 15.30 15.80 l1 1.27 1.40 l2 4.93 5.23 l3 6.85 7.25 l4 1.5 1.7 m2.6 2.9 r0.20 0.60 v0 8
package mechanical data stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 16/23 doc id 018492 rev 3 figure 27. h2pak-2 drawing 8 159712_c
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 package mechanical data doc id 018492 rev 3 17/23 figure 28. h2pak-2 recommended footprint (dimensions are in millimeters) 8 159712_c
package mechanical data stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 18/23 doc id 018492 rev 3 table 11. to-220 type a mechanical data dim. mm min. typ. max. a4.40 4.60 b0.61 0.88 b1 1.14 1.70 c0.48 0.70 d 15.25 15.75 d1 1.27 e 10 10.40 e2.40 2.70 e1 4.95 5.15 f1.23 1.32 h1 6.20 6.60 j1 2.40 2.72 l13 14 l1 3.50 3.93 l20 16.40 l30 28.90 ? p3.75 3.85 q2.65 2.95
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 package mechanical data doc id 018492 rev 3 19/23 figure 29. to-220 type a drawing 00159 88 _typea_rev_ s
package mechanical data stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 20/23 doc id 018492 rev 3 5 package mechanical data table 12. h2pak-2 tape and reel mechanical data tape reel dim. mm dim. mm min. max. min. max. a0 10.5 10.7 a 330 b0 15.7 15.9 b 1.5 d 1.5 1.6 c 12.8 13.2 d1 1.59 1.61 d 20.2 e 1.65 1.85 g 24.4 26.4 f 11.4 11.6 n 100 k0 4.8 5.0 t 30.4 p0 3.9 4.1 p1 11.9 12.1 base qty 1000 p2 1.9 2.1 bulk qty 1000 r50 t 0.25 0.35 w 23.7 24.3
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 package mechanical data doc id 018492 rev 3 21/23 figure 30. tape figure 31. reel p1 a0 d1 p0 f w e d b0 k0 t u s er direction of feed p2 10 pitche s c u m u l a tive toler a nce on t a pe +/- 0.2 mm u s er direction of feed r bending r a di us top cover t a pe am0 88 52v2 a d b f u ll r a di us g me asu red a t h ub c n reel dimen s ion s 40mm min. acce ss hole at s lot loc a tion t t a pe s lot in core for t a pe s t a rt 25 mm min. width am0 88 51v2
revision history stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 22/23 doc id 018492 rev 3 6 revision history table 13. document revision history date revision changes 24-feb-2011 1 first version. 07-may-2012 2 added section 2.1: electrical characteristics (curves) . minor text changes. 07-nov-2012 3 added new device in i 2 pakfp and updated the document accordingly. updated section 4: package mechanical data .
stf130n10f3, stfi130n10f3, STH130N10F3-2, stp130n10f3 doc id 018492 rev 3 23/23 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in military, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STH130N10F3-2

	To Download STH130N10F3-2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .